How to mount the Nightstick NSP-4650B and FORTEM XPP-5466 model dual-light flashlights onto a helmet.
The ultimate helmet-mounted flashlight for emergency personnel and first responders. The XPP-5418 Series Flashlight is cETLus, ATEX, and IECEx listed Intrinsically Safe for use in both above and below ground hazardous locations where explosive gases and dusts may be present. The 5418 uses an LED rated at 200 lumens that works with a deep parabolic reflector to create a 143 meter flashlight beam. The tail switch provides momentary or constant-on functionality. This light meets the requirements of NFPA-1971-8.6 from 3 AA premium batteries (not included). The mount can be attached to either side of the helmet to provide hands-free illumination. Additionally, the user can set the angle of the mount through 140 degrees of adjustment to provide clearance around face shields, goggles or other helmet-mounted equipment.
The FORTEM™ intrinsically safe dual-light™ flashlight is the most versatile choice for helmet-mounted hands-free lighting. With 250 flashlight lumens that is powerful enough to cut through dense smoke combined with a serious independent 115 lumen floodlight mounted at a 45 degree downward angle, the 5466 is designed for professionals who appreciate performance and convenience. User adjustable flashlight modes range from 250 lumens on high, 100 lumens on medium and 25 lumens on low. Dial down the floodlight to light up your gear or feet as you walk by adjusting from 115 lumens on high, to 50 lumens on medium or 10 lumens in potentially-life saving survival mode. Additionally, in Dual-Light mode (both the Flashlight and the Floodlight turned on at the same time) you get 150 lumens providing maximum versatility along with user safety. The 5466 also has a green, rear facing LED light so that others can easily identify team personnel in smoke-filled or dusty environments. The 5466 will fit on any Fire Helmet (or side-brim hard hat) regardless of whether it has an up-turned or down-turned brim thanks to the multi-angle adjustment feature that allows the user to fine tune the exact position and angle of the light. This feature makes it possible to not only avoid goggles, face shields and other helmet-worn gear, but also place the light exactly where it’s needed. The 5466 is IP-67 rated dustproof/waterproof and meets the requirement for NFPA-1971-8.6 (2013). Power comes from 2 included CR-123 batteries.
This Tactical Fire Light (flashlight only FDL-300R or FDL-300R-K01 is kit w/Multi-Angle Helmet Mount) is a complete system for attaching the Tactical Fire Light to any Fire Helmet or Hard Hat. The Tactical Fire Light is rated at 180 Lumens and has a tight long-throw beam that is distance rated at 190 meters. The entire system is IP-X7 waterproof and is drop rated at 2 meters. The mount can be attached to either side of the helmet to provide hands-free illumination for the wearer. Additionally, the user can set the angle of the mount through 140 degrees of adjustment to provide clearance around face shields, goggles or other helmet-mounted equipment. The FDL-300R-K01 meets the requirements of NFPA-1971-8.6 (2013).